Click Below Logo
Industry OrganizationsAutomatic Transmission
Service GroupAutomatic TransmissiionRebuilders AssociationGears MagazineTorque ConverterRebuilders AssociationTransmission RebuilderNetwork International
48RE CNC Billet Flex Plate 03-07
Our Price: $378.88
You Save: $51.07
Our Number: 22FP
Manufacturer: Cascade Product
Mfg Part # : Flywheel
48RE Extreme Duty Billet Flex Plate
HD / HP SFI 29.3 Approved Product
Fits All 5.9L Diesel's 2003 to 2007
Required For Drag Trucks
This is a Diesel Performance Item and Suggested For All Trucks Worked or Abused !
Ideal And Crucial For Chiped , Programmer , and Commonly Towed Models
All Machined Billet One Piece Design
This original factory design for these trucks works fine for daily drivers , but
as soon as these trucks are put to work this is one of the weak points in the system.
This superior strength billet is design to prevent cracking and stress fractures under pressure.
Specifically when the engines are modified of chips and programmers are present ;
the factory one will fail it's primarily a matter of when it will break.
This Can Be Called
Torque Converter Plate
LB7 / LLY Flywheel
The Band Features:
SFI 29.3 ApprovedCNC MachinedSpecial Coating For Rust InhibitingRadial Cut Which Allows FlexChamphered Ring Gear
Will Handle Up To 1500 Ft Lbs Of Torque
Other Information about this product:
This will work on factory torque converters as well as upgraded billet converters.
Fits everything in this family of great toys and work trucks alike.
This family of transmissions are comonly also called Dodge A618 Automatics.
The flex plate is bolted to the crankshaft and then the torque converter is bolted to flex plate.
The torque from the motor is transferred to the flex plate, then goes from the flex plate to the torque converter.
With increased torque from the engine it is common place to tear the center out of a stock flex plate.
Does Not Include Converter Bolts
No Warranty On Performance Parts Due To Abuse Characteristics
SFI Performance Rating Information:
This flywheel flex plate required on drag racing vehicles that are running
11.99 and quicker in the 1/4 mile and 7.49 and quicker in the 1/8 mile , or for any vehicle exceeding 135 mph.
New Drag Rules requires that the material cannot be a stamped steel and must be billet.
To maintain the SFI specification 29.3 requirements, the flex plate must be replaced every three years.
Critical Shipping Note
Alaska , Hawaii , Guam , and US Territories must choose
USPS priority mail shipping for this item due to the weight of this product.
Our Part # 22FP
Mfgr Part # BF47BS
Other Reference # 3059002104
BD Diesel Performance # 1041210
We would appreciate the opportunity to serve your transmission parts needs ! ! !
Cascade Transmission Parts , Inc.
All Rights Reserved ®
Click Below Orbs
Connect With Us
Install Support Videos
Our Facebook Page
Twitter - Follow Us
Technical ResourcesVIN DECODERZF FACTORY WEBSITEFIND DIAGRAMSDiagramsTSB's